PRE-CRASH SAFETY SYSTEM CANCEL SWITCH INSTALLATION


  1. INSTALL PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY


    1. Engage the 2 claws to install the pre-crash system cancel switch assembly.

  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    1. Connect each connector.

    2. Engage the guide and claw.

    3. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <D>.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    1. Connect each connector.

    2. Engage the guide and 2 claws.

    3. Install the No. 1 instrument panel under cover sub-assembly with the screw <D>.