FRONT SEAT SIDE AIRBAG ASSEMBLY INSTALLATION


  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY

    CAUTION:


    • The nuts must not be reused.

    • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.


    1. Install the front seat airbag assembly with 2 new nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Engage the 2 clamps.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

    for Manual Seat: Click here

    for Power Seat: Click here

  3. CONNECT FRONT SEAT AIRBAG ASSEMBLY


    1. Engage the clamp and connect the seat heater wire harness connector.

    2. Engage the fastener to secure the airbag wire harness.

    3. Connect the airbag wire harness to the seat clamp.

    4. Engage the claw and 3 clamps to install the airbag wire harness.

    5. Connect the rubber band.

  4. INSTALL FRONT SEAT ASSEMBLY

    for Manual Seat: Click here

    for Power Seat: Click here

  5. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here