METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the GTS.

    2. Connect the GTS to the DLC3.

    3. Turn the power switch on (IG).

    4. Turn the GTS on.

    5. Enter the following menus: Customize Setting / Warning, Display.

    6. Select the setting by referring to the table below.

      Warning
      Tester Display Default Content Setting Relevant ECU
      Key Remind Sound Slow Function to change the cycle of the key reminder buzzer Normal, Fast or Slow Combination meter assembly
      Reverse Buzzer Continual Function to change the type of the reverse warning buzzer Single or Continual Combination meter assembly
      Display
      Tester Display Default Content Setting Relevant ECU
      Tail OFF Indicator ON Function to turn on/off the tail indicator light ON or OFF Combination meter assembly