BACK DOOR COURTESY SWITCH REMOVAL


  1. REMOVE REAR DOOR SCUFF PLATE LH


    1. A0040QT

      Disengage the 7 claws and remove the rear door scuff plate LH.

  2. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

  3. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A0041DUE01
      Text in Illustration
      *1 Front Hook
      *2 Rear Hook

      Disengage the front hook of the rear seat cushion assembly from the vehicle body as shown in the illustration.

      Standard Measurement
      Dimension Measurement
      a 100 mm (3.94 in.) or less

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. Choose a front hook to disengage first. Place your hands near the front hook as shown in the illustration. Then lift the seat cushion to disengage the front hook.

      2. Repeat the above procedure for the other hook.

    2. Disengage the 2 rear hooks of the rear seat cushion assembly from the rear seatback assembly.

    3. Remove the rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  4. REMOVE REAR SIDE SEATBACK ASSEMBLY LH


    1. A0042ZC

      Remove the bolt.

    2. A0043ARE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener.

    3. A0042MX

      Disengage the 2 guides and remove the rear side seatback assembly LH as shown in the illustration.

  5. REMOVE REAR NO. 2 FLOOR BOARD


    1. A00449U

      Using a clip remover, remove the 2 clips.

    2. Disengage the 3 fasteners and remove the rear No. 2 floor board.

  6. REMOVE REAR NO. 3 FLOOR BOARD


    1. Remove the rear No. 3 floor board.

  7. REMOVE DECK FLOOR BOX RH


    1. A00440B

      Disengage the claw and 4 guides and remove the deck floor box RH.

  8. REMOVE TONNEAU COVER ASSEMBLY


    1. Remove the tonneau cover assembly.

  9. REMOVE REAR NO. 4 FLOOR BOARD SUB-ASSEMBLY


    1. Remove the rear No.4 floor board sub-assembly.

  10. REMOVE DECK FLOOR BOX LH

    Tech Tips

    Use the same procedure described for the RH side.

  11. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY


    1. A0043P1

      Disengage the claw and 2 clips, and remove the rear No. 2 floor board sub-assembly.

  12. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY


    1. A004109

      Disengage the claw and 3 clips, and remove the rear No. 1 floor board sub-assembly.

  13. REMOVE REAR NO. 1 FLOOR BOARD


    1. Fold the rear seatback assembly LH forward.

    2. A0042PSE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener.

    3. Fold the rear seatback assembly LH forward.

    4. A0040XLE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener.

    5. A0043PV

      Using a clip remover, remove the clip.

    6. Disengage the 3 fasteners and remove the rear No. 1 floor board.

  14. REMOVE DECK TRIM SERVICE HOLE COVER


    1. A0040WX

      Disengage the 4 claws.

    2. Disengage the 4 guides and remove the deck trim service hole cover.

  15. REMOVE REAR DECK TRIM COVER


    1. A0043JF

      Disengage the 4 claws and remove the rear deck trim cover.

  16. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY


    1. A0042TO

      Remove the 2 bolts.

    2. Disengage each guide and remove the 2 luggage hold belt striker assemblies.

  17. REMOVE TONNEAU COVER HOLDER CAP


    1. A0043ZDE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the claw and remove the tonneau cover holder cap.

      Tech Tips

      Tape the screwdriver tip before use.

  18. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Remove the screw.

      A0041IQ

    2. Disengage the 7 claws and 2 clips.

    3. Disconnect the connector and remove the deck trim side panel assembly LH.

  19. REMOVE BACK DOOR LOCK ASSEMBLY


    1. A0041Y4

      Disconnect the connector and disengage the 4 clamps.

    2. A0043ZY

      Remove the 3 bolts and back door lock assembly.