LIGHT CONTROL RHEOSTAT INSTALLATION


  1. INSTALL LIGHT CONTROL RHEOSTAT


    1. A0041FH

      Engage the 2 claws to install the light control rheostat.

  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. Connect each connector.

    2. Engage the clamp.

    3. Engage the 2 guides and claw to connect the hood lock control cable.

    4. A00412T

      Engage the 6 claws and clip.

    5. Install the lower instrument panel finish panel assembly with the screw <C>.

  3. INSTALL COWL SIDE TRIM BOARD


    1. Engage the 2 clips.

    2. Install the cowl side trim board LH with the clip.

  4. INSTALL FRONT DOOR SCUFF PLATE


    1. Engage the 10 claws to install the front door scuff plate LH.