PATTERN SELECT SWITCH REMOVAL


  1. REMOVE FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  2. REMOVE COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. A0041MT

      Remove the screw <C>.

    2. A00438O

      Disengage the 6 claws and clip as shown in the illustration.

    3. A00436H

      Disengage the claw and 2 guides and disconnect the hood lock control cable.

    4. Disconnect each connector and clamp, and remove the lower instrument panel finish panel assembly.

  4. REMOVE PATTERN SELECT SWITCH ASSEMBLY


    1. A00412P

      Disengage the 2 claws to remove the pattern select switch assembly.