GLOVE BOX LIGHT REMOVAL


  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A00417SE01
      Text in Illustration
      *a Lift slightly

      Using a moulding remover, slightly lift the panel at the position shown in the illustration.

    2. Pull the integration control and panel assembly in the direction indicated by the arrow to disengage the 6 claws.

    3. Disconnect each connector and remove the integration control and panel assembly.

  2. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A0041IM

      Pull the lower center instrument cluster finish panel sub-assembly in the direction indicated by the arrow to disengage the 2 claws and 2 clips.

    2. A00428K

      Pull the lower center instrument cluster finish panel sub-assembly in the direction indicated by the arrow to disengage the 5 claws and remove the lower center instrument cluster finish panel sub-assembly.

  3. REMOVE NO. 1 SIDE DEFROSTER NOZZLE


    1. A0043DQE01
      Text in Illustration
      *a Lift slightly

      Using a moulding remover, slightly lift the panel at the position shown in the illustration.

    2. Pull the No. 1 side defroster nozzle in the direction indicated by the arrow to disengage the 3 claws and remove the No. 1 side defroster nozzle.

  4. REMOVE NO. 2 INSTRUMENT PANEL REGISTER


    1. A004446

      Pull the No. 2 instrument panel register in the direction indicated by the arrow to disengage the claw and clip.

    2. A004480

      Pull the No. 2 instrument panel register in the direction indicated by the arrow to disengage the 2 claws and remove the No. 2 instrument panel register.

  5. REMOVE GLOVE COMPARTMENT DOOR


    1. Open the glove compartment door assembly and glove compartment door.

    2. A0040CN

      Pull the glove compartment door in the direction indicated by the arrow to disengage the 7 claws.

    3. Pull the glove compartment door in the direction indicated by the arrow to remove the glove compartment door.

  6. REMOVE GLOVE BOX LIGHT ASSEMBLY


    1. A0042RZ

      Disconnect the connector.

    2. Using a screwdriver, disengage the 2 claws and remove the glove box light assembly.