REAR DOOR COURTESY SWITCH REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE REAR DOOR SCUFF PLATE


    1. A0040QT

      Disengage the 7 claws and remove the rear door scuff plate LH.

  2. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP


    1. Disconnect the rear door opening trim weatherstrip.

  3. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A0041DUE01
      Text in Illustration
      *1 Front Hook
      *2 Rear Hook

      Disengage the front hook of the rear seat cushion assembly from the vehicle body as shown in the illustration.

      Standard Measurement
      Dimension Measurement
      a 100 mm (3.94 in.) or less

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. Choose a front hook to disengage first. Place your hands near the front hook as shown in the illustration. Then lift the seat cushion to disengage the front hook.

      2. Repeat the above procedure for the other hook.

    2. Disengage the 2 rear hooks of the rear seat cushion assembly from the rear seatback assembly.

    3. Remove the rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  4. REMOVE REAR SIDE SEATBACK ASSEMBLY LH (for LH Side)


    1. A0042ZC

      Remove the bolt.

    2. A0043ARE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener.

    3. A0042MX

      Disengage the 2 guides and remove the rear side seatback assembly LH as shown in the illustration.

  5. REMOVE REAR SIDE SEATBACK ASSEMBLY RH (for RH Side)


    1. A0041NL

      Remove the bolt.

    2. A0041DQE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener.

    3. A0041ZJ

      Disengage the 2 guides and remove the rear side seatback assembly RH as shown in the illustration.

  6. REMOVE TONNEAU COVER ASSEMBLY


    1. Remove the tonneau cover assembly.

  7. REMOVE REAR NO. 2 FLOOR BOARD


    1. A00449U

      Using a clip remover, remove the 2 clips.

    2. Disengage the 3 fasteners and remove the rear No. 2 floor board.

  8. REMOVE REAR NO. 3 FLOOR BOARD


    1. Remove the rear No. 3 floor board.

  9. REMOVE DECK FLOOR BOX RH


    1. A00440B

      Disengage the claw and 4 guides and remove the deck floor box RH.

  10. REMOVE REAR NO. 4 FLOOR BOARD SUB-ASSEMBLY


    1. Remove the rear No.4 floor board sub-assembly.

  11. REMOVE DECK FLOOR BOX LH

    Tech Tips

    Use the same procedure described for the RH side.

  12. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY


    1. A0043P1

      Disengage the claw and 2 clips, and remove the rear No. 2 floor board sub-assembly.

  13. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY


    1. A004109

      Disengage the claw and 3 clips, and remove the rear No. 1 floor board sub-assembly.

  14. REMOVE REAR NO. 1 FLOOR BOARD


    1. Fold the rear seatback assembly LH forward.

    2. A0042PSE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener.

    3. Fold the rear seatback assembly LH forward.

    4. A0040XLE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener.

    5. A0043PV

      Using a clip remover, remove the clip.

    6. Disengage the 3 fasteners and remove the rear No. 1 floor board.

  15. REMOVE DECK TRIM SERVICE HOLE COVER


    1. A0040WX

      Disengage the 4 claws.

    2. Disengage the 4 guides and remove the deck trim service hole cover.

  16. REMOVE REAR DECK TRIM COVER


    1. A0043JF

      Disengage the 4 claws and remove the rear deck trim cover.

  17. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)


    1. A0042TO

      Remove the 2 bolts.

    2. Disengage each guide and remove the 2 luggage hold belt striker assemblies.

  18. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure described for the LH side.

  19. REMOVE TONNEAU COVER HOLDER CAP (for LH Side)


    1. A0043ZDE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the claw and remove the tonneau cover holder cap.

      Tech Tips

      Tape the screwdriver tip before use.

  20. REMOVE TONNEAU COVER HOLDER CAP (for RH Side)

    Tech Tips

    Use the same procedure described for the LH side.

  21. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)


    1. Remove the screw.

      A0041IQ

    2. Disengage the 7 claws and 2 clips.

    3. Disconnect the connector and remove the deck trim side panel assembly LH.

  22. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)


    1. Remove the screw.

      A0040C2

    2. Disengage the 7 claws and 2 clips, and remove the deck trim side panel assembly RH.

  23. REMOVE REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. Disconnect the connector.

    2. A00435U

      Using a T30 "TORX" socket wrench, remove the bolt and rear door courtesy light switch assembly.