SECURITY INDICATOR LIGHT ASSEMBLY INSPECTION


  1. INSPECT SECURITY INDICATOR LIGHT


    1. A0043X5E07
      Text in illustration
      *a

      Component with harness connected

      (Security Indicator Light (Combination Meter Assembly))

      Apply auxiliary battery voltage from the wire harness back side between the specified terminals of the indicator, and check the lighting condition of the security indicator.

      OK
      Measurement Condition Specified Condition

      Auxiliary battery positive (+) → Terminal 22

      Auxiliary battery negative (-) → Terminal 30

      		 Security indicator comes on

      If the result is not as specified, replace the No. 3 meter circuit plate.