ELECTRICAL KEY OSCILLATOR (for Rear Floor) INSTALLATION


  1. INSTALL NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. Connect the connector.

    2. Engage the 2 clamps to install the No. 3 indoor electrical key antenna assembly.

      Note

      Be careful when installing the No. 3 indoor electrical key antenna assembly. If the No. 3 indoor electrical key antenna assembly is dropped, replace it with a new one.

  2. INSTALL REAR NO. 1 FLOOR BOARD


    1. Engage the 3 fasteners.

    2. Install the rear No. 1 floor board with the clip.

    3. Engage each fastener.

  3. INSTALL REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY


    1. Engage the claw and 3 clips to install the rear No. 1 floor board sub-assembly.

  4. INSTALL REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY


    1. Engage the claw and 2 clips to install the rear No. 2 floor board sub-assembly.

  5. INSTALL REAR NO. 2 FLOOR BOARD


    1. Engage the 3 fasteners.

    2. Install the rear No. 2 floor board with the 2 clips.