ELECTRICAL KEY OSCILLATOR (for Center Floor) REMOVAL


  1. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A0041DUE01
      Text in Illustration
      *1 Front Hook
      *2 Rear Hook

      Disengage the front hook of the rear seat cushion assembly from the vehicle body as shown in the illustration.

      Standard Measurement
      Dimension Measurement
      a 100 mm (3.94 in.) or less

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. Choose a front hook to disengage first. Place your hands near the front hook as shown in the illustration. Then lift the seat cushion to disengage the front hook.

      2. Repeat the above procedure for the other hook.

    2. Disengage the 2 rear hooks of the rear seat cushion assembly from the rear seatback assembly.

    3. Remove the rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  2. REMOVE NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. A0041LW

      Remove the 2 clips from the floor carpet.

    2. A00429U

      Remove the bolt.

    3. Disconnect the connector and remove the No. 2 indoor electrical key antenna assembly.

      Note

      Be careful when removing the No. 2 indoor electrical key antenna assembly. If the No. 2 indoor electrical key antenna assembly is dropped, replace it with a new one.