INTRUSION SENSOR REMOVAL


  1. REMOVE ROOF TOP MOULDING


    1. A0043G0

      Using a moulding remover, disengage the 3 claws and 2 clips, and remove the roof top moulding.

  2. REMOVE MAP LIGHT ASSEMBLY


    1. A00446QE01

      Disengage the 4 clips and 2 guides in the order shown in the illustration.

    2. Disconnect the connector and remove the map light assembly.

  3. REMOVE THEFT WARNING RADAR SENSOR


    1. A0040RV

      Disconnect the connector.

    2. Disengage the clamp.

    3. Remove the 3 screws and theft warning radar sensor.