ENTRY AND START SYSTEM (for Start Function) DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.

    5. Read the DTC by following the prompts on the GTS screen.

      Tech Tips

      Refer to the GTS operator's manual for further details.

  2. CLEAR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Power Source Control / Trouble Codes.

    5. Clear the DTCs by following the directions on the GTS screen.

      Tech Tips

      Refer to the GTS operator's manual for further details.