PARKING ASSIST PRE SUPPORT SWITCH INSPECTION


  1. INSPECT PARKING ASSIST PRE SUPPORT SWITCH ASSEMBLY


    1. A0040SGE01
      Text in Illustration
      *a

      Component without harness connected

      (Parking Assist Pre Support Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 (E) - 6 (IG) Parking assist pre support switch pushed in Below 1 Ω
      Parking assist pre support switch not pushed 10 kΩ or higher

      If the result is not as specified, replace the parking assist pre support switch assembly.