POWER SWITCH INSTALLATION


  1. INSTALL POWER SWITCH


    1. Attach the 2 claws to install the power switch.

  2. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. A0040N0

      Connect the connector.

    2. Engage the 3 claws to install the upper instrument panel finish panel sub-assembly.

  3. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. Connect the connector.

    2. Engage the 14 claws to install the instrument cluster finish panel garnish.

  4. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A0040B6

      Engage the 7 claws and 2 clips to install the lower center instrument cluster finish panel sub-assembly.

  5. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A004159

      Connect each connector.

    2. Engage the 6 claws to install the integration control and panel assembly.

  6. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. INSTALL DECK FLOOR BOX RH


    1. Engage the claw and 4 guide to install the deck floor box RH.

  8. INSTALL REAR NO. 3 FLOOR BOARD


    1. Install the rear No. 3 floor board.