OIL PUMP REMOVAL


  1. REMOVE CHAIN SUB-ASSEMBLY

    Click here

  2. REMOVE CRANKSHAFT TIMING SPROCKET


    1. A004415

      Remove the crankshaft timing sprocket.

  3. REMOVE NO. 2 CHAIN SUB-ASSEMBLY


    1. Temporarily tighten the crankshaft pulley and crankshaft pulley bolt.

    2. A0041IGE01

      Using SST, remove the oil pump drive shaft sprocket nut while holding the crankshaft pulley.

      SST
      09213-58014   ( 91551-80840 )
      09330-00021

    3. Remove the crankshaft pulley and crankshaft pulley bolt.

    4. A0042K5

      Remove the bolt, chain tensioner plate and chain damper spring.

    5. A0041ESE01
      Text in Illustration
      *1 Oil Pump Drive Gear
      *2 Oil Pump Drive Shaft Gear
      *3 No. 2 Chain Sub-assembly

      Remove the oil pump drive gear, oil pump drive shaft gear and No. 2 chain sub-assembly.

  4. REMOVE NO. 1 CRANKSHAFT POSITION SENSOR PLATE


    1. A00436C

      Remove the No. 1 crankshaft position sensor plate.

  5. REMOVE CRANKSHAFT TIMING GEAR KEY


    1. A0042RJE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, remove the 2 crankshaft timing gear keys.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE OIL PAN DRAIN PLUG


    1. A0040MT

      Remove the oil pan drain plug and gasket.

  7. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY


    1. A0042FK

      Remove the 10 bolts and 2 nuts.

    2. A0041DC

      Insert the blade of an oil pan seal cutter between the crankcase and oil pan. Cut through the sealer and remove the No. 2 oil pan sub-assembly.

      Note

      Be careful not to damage the contact surfaces of the crankcase and oil pan.

  8. REMOVE OIL PUMP ASSEMBLY


    1. A00406O

      Remove the 3 bolts and oil pump assembly.