PCV VALVE REMOVAL


  1. REMOVE NO. 2 CYLINDER HEAD COVER


    1. A0042Q6

      Remove the 3 clips and No. 2 cylinder head cover.

      Note


      • Attempting to disengage both front and rear clips at the same time may cause the cover to break.

      • Pull the cover straight up to remove. Attempting to pull the cover forward may cause it to break.

  2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    1. A0040W1

      Disconnect the mass air flow meter connector.

    2. A0040WOE01

      Release the 2 clamps.

    3. Loosen the hose clamp and remove the air cleaner cap sub-assembly.

  3. REMOVE INLET AIR CLEANER ASSEMBLY


    1. A0040MW

      Remove the 2 bolts and inlet air cleaner assembly.

  4. REMOVE AIR CLEANER CASE


    1. A0042F9

      Separate the No. 4 water by-pass hose from the air cleaner case.

    2. Remove the 3 bolts, 3 clamps and air cleaner case.

  5. REMOVE NO. 1 ENGINE UNDER COVER

  6. REMOVE VENTILATION VALVE SUB-ASSEMBLY


    1. A0041T2

      Remove the ventilation hose from the ventilation valve sub-assembly.

    2. A0042K4E01
      Text in Illustration
      *1 Ball Joint Lock Nut Wrench (22 mm)

      Using a ball joint lock nut wrench (22 mm), remove the ventilation valve sub-assembly.