EXHAUST PIPE GAS CONTROL ACTUATOR REMOVAL


  1. REMOVE NO. 1 ENGINE UNDER COVER

  2. DRAIN ENGINE COOLANT (for Engine)

    Note

    Do not remove the reservoir tank cap and radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. A0043WF

      Loosen the radiator drain cock plug.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the local regulations.

    2. Remove the reserve tank cap and drain the coolant.

      A0041SAE01
      Text in Illustration
      *1 Reservoir Tank Cap *2 Radiator Drain Cock Plug

  3. REMOVE EXHAUST PIPE GAS CONTROL ACTUATOR

    Note

    When removing the exhaust pipe gas control actuator, use caution because coolant may spill out from the exhaust heat recirculation system.


    1. A0043MO

      Disconnect the 2 water hoses.

    2. A0043W9E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with the tip taped, pry the portion indicated in the illustration to disengage the spring.

    3. A0043UR

      Remove the 3 bolts, 3 nuts, gasket and exhaust pipe gas control actuator case.

    4. A0042C3E01
      Text in Illustration
      *1 Exhaust Pipe Gas Control Stopper
      *2 Exhaust Pipe Gas Control Actuator
      *3 Port A
      *4 Port B

      While closing port A, apply compressed air to port B to remove the exhaust pipe gas control actuator shown in the illustration.

      Tech Tips

      Use a piece of cloth to catch the exhaust pipe gas control actuator.