FUEL PRESSURE REGULATOR INSTALLATION


  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


    1. A0042Z3E11
      Text in Illustration
      *1 O-ring

      Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.

    2. A0042YCE02

      Install the fuel pressure regulator assembly.

  2. INSTALL FUEL PUMP


    1. A00440IE05
      Text in Illustration
      *1 O-ring
      *2 Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.

    2. A0043P8

      Connect the fuel pump harness connector.

    3. A00422C

      Engage the 5 claws of the fuel pump.

      Note


      • Make sure that the O-ring is not cut or pinched during the installation.

      • Engage the claws securely.

      • Do not remove the fuel filter.

    4. A0041ZD

      Engage the 2 claws of the No. 1 fuel suction support.

    5. A0041IT

      Engage the 2 claws of the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.

    6. A0042T1

      Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.

      Note

      Do not apply excessive force to the fuel tube or the suction support.

    7. A00431N

      Connect the connector of the fuel pump harness.

  3. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A00446U

      Install the fuel sender gauge assembly by sliding it downward.

    2. A0043EZ

      Connect the connector of the fuel sender gauge assembly.

    3. A0040L6

      Install the 2 harness protectors.

      Note

      Do not damage the wire harness.

    4. A0040M0

      Connect the 3 harness clamps.

  4. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

    Click here