FUEL SENDER GAUGE ASSEMBLY INSPECTION


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. Check that the float moves smoothly between F and E.

    2. Inspect the fuel sender gauge assembly resistance.


      1. Measure the resistance according to the value(s) in the table below.

        A0043JVE01
        Text in Illustration
        *A Type A *B Type B
        *a

        Component without wire harness connected

        (Fuel Sender Gauge Assembly)

        		 - -
        Standard Resistance
        Tester Connection Float Level Specified Condition (Type A) Specified Condition (Type B)
        1 - 2 F 13.5 to 16.5 Ω 12.0 to 18.0 Ω
        Between F and E 13.5 to 414.5 Ω (Gradually changes) 12.0 to 415.0 Ω (Gradually changes)
        E 405.5 to 414.5 Ω 405.0 to 415.0 Ω

        If the result is not as specified, replace the fuel sender gauge assembly.