SERVICE PLUG GRIP INSTALLATION


  1. INSTALL SERVICE PLUG GRIP

    CAUTION:

    Wear insulating gloves.

    Note


    • Before connecting the service plug, check that no parts and tools are left in the vehicle and that the high voltage terminals and connectors are connected securely.

    • Connect the auxiliary battery on the same day of installing the service plug grip to allow the battery cell voltage equalization function of the battery smart unit to operate.


    1. Wear insulated gloves and install the service plug grip in the order shown in the illustration.

      A0042HD

    2. Rotate the handle of the service plug grip 90° toward the battery and slide it in the direction shown by the arrow until a click sound is heard.

  2. INSTALL DECK TRIM SERVICE HOLE COVER


    1. Install the deck trim service hole cover with the 2 claws and 2 clips.

  3. CONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL DECK FLOOR BOX RH


    1. Engage the claw and 4 guide to install the deck floor box RH.

  5. INSTALL REAR NO. 3 FLOOR BOARD


    1. Install the rear No. 3 floor board.