FRAME WIRE REMOVAL


  1. REMOVE INVERTER WITH CONVERTER ASSEMBLY

    Click here.

  2. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here.

  3. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR


    1. A00428P

      Remove the 3 nuts and front No. 1 floor heat insulator.

  4. REMOVE FRONT FLOOR COVER RH


    1. A004191

      Remove the bolt.

    2. Remove the 4 clips and the front floor cover RH.

  5. REMOVE FRONT FLOOR COVER CENTER RH


    1. A00421Y

      Remove the 3 clips and the front floor cover center RH.

  6. REMOVE FRONT SUSPENSION MEMBER BRACE REAR RH


    1. Using a transmission jack, hold the front suspension cross member.

      Note

      Be sure to position the transmission jack to properly support the front suspension cross member.

    2. A00406F

      Remove the clip.

    3. Remove the 3 bolts and front suspension member brace rear RH.

  7. REMOVE REAR NO. 2 FLOOR BOARD


    1. A00449U

      Using a clip remover, remove the 2 clips.

    2. Disengage the 3 fasteners and remove the rear No. 2 floor board.

  8. REMOVE REAR NO. 4 FLOOR BOARD SUB-ASSEMBLY


    1. Remove the rear No.4 floor board sub-assembly.

  9. REMOVE DECK FLOOR BOX LH

    Tech Tips

    Use the same procedure described for the RH side Click here.

  10. REMOVE TONNEAU COVER ASSEMBLY


    1. Remove the tonneau cover assembly.

  11. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY


    1. A0043P1

      Disengage the claw and 2 clips, and remove the rear No. 2 floor board sub-assembly.

  12. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY


    1. A004109

      Disengage the claw and 3 clips, and remove the rear No. 1 floor board sub-assembly.

  13. REMOVE REAR NO. 1 FLOOR BOARD


    1. Fold the rear seatback assembly LH forward.

    2. A0042PSE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener.

    3. Fold the rear seatback assembly LH forward.

    4. A0040XLE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener.

    5. A0043PV

      Using a clip remover, remove the clip.

    6. Disengage the 3 fasteners and remove the rear No. 1 floor board.

  14. REMOVE DECK TRIM SERVICE HOLE COVER


    1. A0040WX

      Disengage the 4 claws.

    2. Disengage the 4 guides and remove the deck trim service hole cover.

  15. REMOVE REAR DECK TRIM COVER


    1. A0043JF

      Disengage the 4 claws and remove the rear deck trim cover.

  16. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side Click here.

  17. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side Click here.

  18. REMOVE REAR SEAT CUSHION ASSEMBLY


    1. A0041DUE01
      Text in Illustration
      *1 Front Hook
      *2 Rear Hook

      Disengage the front hook of the rear seat cushion assembly from the vehicle body as shown in the illustration.

      Standard Measurement
      Dimension Measurement
      a 100 mm (3.94 in.) or less

      Note

      Follow the instructions below carefully as the cushion frame can be deformed easily.


      1. Choose a front hook to disengage first. Place your hands near the front hook as shown in the illustration. Then lift the seat cushion to disengage the front hook.

      2. Repeat the above procedure for the other hook.

    2. Disengage the 2 rear hooks of the rear seat cushion assembly from the rear seatback assembly.

    3. Remove the rear seat cushion assembly.

      Note

      Be careful not to damage the vehicle body.

  19. REMOVE REAR SIDE SEAT BACK ASSEMBLY RH


    1. A0041NL

      Remove the bolt.

    2. A0041DQE01
      Text in Illustration
      *1 Fastener

      Disengage the fastener.

    3. A0041ZJ

      Disengage the 2 guides and remove the rear side seatback assembly RH as shown in the illustration.

  20. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)

    Tech Tips

    Use the same procedure described for the LH side Click here.

  21. REMOVE TONNEAU COVER HOLDER CAP (for RH Side)

    Tech Tips

    Use the same procedure described for the LH side Click here.

  22. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH


    1. Remove the screw.

      A0040C2

    2. Disengage the 7 claws and 2 clips, and remove the deck trim side panel assembly RH.

  23. REMOVE NO. 2 HYBRID VEHICLE BATTERY SHIELD PANEL

    CAUTION:

    Wear insulated gloves.


    1. A00445NE01
      Text in Illustration
      *1 Battery Cover Lock Striker
      *2 Button
      *a Projection
      *b Turn

      Using the service plug grip, remove the battery cover lock striker.

      Tech Tips

      Insert the projection part of the service plug grip, and turn the button of the battery cover lock striker counterclockwise, and release the lock.

    2. A0042Z5

      Remove the 3 nuts and No. 2 hybrid vehicle battery shield panel.

  24. DISCONNECT CABLE FROM POSITIVE AUXILIARY BATTERY TERMINAL


    1. Remove the connector cover.

    2. A0043A3

      Remove the nut and disconnect the cable.

  25. REMOVE EV CHARGER WIRE

    CAUTION:

    Wear insulated gloves.


    1. A004014

      Disconnect the connector.

      Note

      Insulate the disconnected connector with insulating tape.

    2. Remove the nut and disconnect the electric vehicle charger wire.

  26. REMOVE FRAME WIRE

    CAUTION:

    Wear insulated gloves.

    Note

    Insulate the disconnected terminals with insulating tape.


    1. A0042PV

      Disconnect the 2 clamps.

    2. A0041UN

      Using an insulated tool, remove the 2 nuts.

    3. Disconnect the shield wire ground and frame wire.

    4. Disconnect the clamp and frame wire.

    5. A0043QW

      Disconnect the clamp from the floor panel and remove the wire harness protector.

    6. A0043LI

      Disconnect the 2 wire harness clamps from the floor panel.

    7. A0042NH

      Disconnect the 3 claws and push the frame wire out from the floor panel.

    8. A00430Q

      Disconnect the connector from the engine room junction block assembly.

    9. A0041RC

      Disconnect the 2 clamps.

    10. A00447J

      Disconnect the clamp.

    11. A0041ZT

      Disconnect the clamp.

    12. A0042UB

      Remove the nut and separate the heater water pipe sub-assembly.

    13. A00447HE05
      Text in Illustration
      *A for RHD
      *B for LHD

      Remove the nut and disconnect the 2 clamps.

    14. A0043PU

      Remove the nut and disconnect the clamp.

    15. A004253

      Remove the nut.

    16. Disconnect the 4 clamps and remove the frame wire.

      A0041JN

      Note

      The clamps are non-reusable parts.