PLUG-IN CHARGE CONTROL SYSTEM DTC CHECK / CLEAR


  1. CHECK FOR DTCS (PLUG-IN CONTROL)


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Plug-in Control / Trouble Codes.

    4. Check the DTCs and freeze frame data, and write them down.

    5. Check the details of the DTCs Click here.

  2. CHECK FREEZE FRAME DATA AND INFORMATION


    1. If a DTC is present, select it in order to display its freeze frame data.

    2. Read the freeze frame data recorded when the DTC was set.

      Note

      When checking the information codes for the plug-in charge control system, refer to Detail Code 1 to 5.

  3. CHECK FOR DTCS (SYSTEMS OTHER THAN PLUG-IN CONTROL)

    Tech Tips

    The plugin charge control ECU assembly maintains communication with other computers, including the power management control ECU, ECM and skid control ECU. Therefore, if the plugin charge control ECU assembly outputs a warning, it is necessary to check and record the DTCs of all systems.


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Health Check.

    4. If DTCs are present, check the relevant systems.

      Tech Tips

      If DTCs for the CAN communication system are present in addition to other DTCs, first troubleshoot and repair any malfunctions in the CAN communication system Click here.

  4. CLEAR DTCS


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Enter the following menus: Powertrain / Plug-in Control / Trouble Codes.

    4. Clear DTCs and freeze frame data.

      Note

      Clearing the DTCs will also clear the freeze frame data Click here.