INTEGRATION RELAY INSPECTION

INSPECT NO. 2 INTEGRATION RELAY

1. IG2 RELAY:

   
   
   1. 

      Text in Illustration

      *1	No. 2 Integration Relay

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition No. 2 integration relay (1C-1) - No. 2 integration relay (1A-4) Auxiliary battery voltage is not applied between terminals 1A-2 and 1A-3 10 kΩ or higher No. 2 integration relay (1C-1) - No. 2 integration relay (1A-4) Auxiliary battery voltage is applied between terminals 1A-2 and 1A-3 Below 1 Ω

      If the resistance is not as specified, replace the No. 2 integration relay.

2. EFI MAIN RELAY:

   
   
   1. 

      Text in Illustration

      *1	No. 2 Integration Relay

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition No. 2 integration relay (1C-1) - No. 2 integration relay (1B-4) Auxiliary battery voltage is not applied between terminals 1B-2 and 1B-3 10 kΩ or higher No. 2 integration relay (1C-1) - No. 2 integration relay (1B-4) Auxiliary battery voltage is applied between terminals 1B-2 and 1B-3 Below 1 Ω

      If the resistance is not as specified, replace the No. 2 integration relay.

3. C/OPN RELAY:

   
   
   1. 

      Text in Illustration

      *1	No. 2 Integration Relay

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition No. 2 integration relay (1B-5) - No. 2 integration relay (1B-8) Auxiliary battery voltage is not applied between terminals 1B-6 and 1B-7 10 kΩ or higher No. 2 integration relay (1B-5) - No. 2 integration relay (1B-8) Auxiliary battery voltage is applied between terminals 1B-6 and 1B-7 Below 1 Ω

      If the resistance is not as specified, replace the No. 2 integration relay.

4. BATT FAN RELAY:

   
   
   1. 

      Text in Illustration

      *1	No. 2 Integration Relay

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition No. 2 integration relay (1C-1) - No. 2 integration relay (1A-8) Auxiliary battery voltage is not applied between terminals 1A-6 and 1A-7 10 kΩ or higher No. 2 integration relay (1C-1) - No. 2 integration relay (1A-8) Auxiliary battery voltage is applied between terminals 1A-6 and 1A-7 Below 1 Ω

      If the resistance is not as specified, replace the No. 2 integration relay.