ENGINE COOLANT TEMPERATURE SENSOR REMOVAL


  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. DRAIN COOLANT (for Engine)

    Note

    Do not remove the reservoir tank cap and radiator drain cock plug while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. A0043WF

      Loosen the radiator drain cock plug.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the local regulations.

    2. Remove the reserve tank cap and drain the coolant.

      A0041SAE01
      Text in Illustration
      *1 Reservoir Tank Cap *2 Radiator Drain Cock Plug
  3. REMOVE FUEL INJECTOR ASSEMBLY

    Click here

  4. SEPARATE INVERTER RESERVE TANK ASSEMBLY


    1. A0042Y0

      Remove the 2 bolts, and separate the inverter reserve tank assembly.

  5. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. Disconnect the engine coolant temperature sensor connector.

    2. A00430CE01
      Text in Illustration
      *a Union Nut Wrench
      *b Gasket

      Using a union nut wrench 19 mm, remove the engine coolant temperature sensor.

    3. Remove the gasket from the engine coolant temperature sensor.