CAMSHAFT POSITION SENSOR INSTALLATION

Tech Tips

Although the part name refers to the No. 1 crank position sensors, this procedure is for the camshaft position sensors.


  1. INSTALL NO. 1 CRANK POSITION SENSOR


    1. A0042VQ

      Apply a light coat of engine oil to the O-rings on the No. 1 crank position sensors.

    2. A00415IE01

      Install the No. 1 crank position sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    3. Connect the No. 1 crank position sensor connector.

  2. INSPECT FOR OIL LEAK

  3. INSTALL NO. 2 CYLINDER HEAD COVER


    1. Engage the 3 clips to install the No. 2 cylinder head cover.

      Note


      • Be sure to engage the clips securely.

      • Do not apply excessive force or hit the cover to engage the clips. This may cause the cover to break.