CAMSHAFT OIL CONTROL VALVE REMOVAL


  1. REMOVE NO. 2 CYLINDER HEAD COVER


    1. A0042Q6

      Remove the 3 clips and No. 2 cylinder head cover.

      Note


      • Attempting to disengage both front and rear clips at the same time may cause the cover to break.

      • Pull the cover straight up to remove. Attempting to pull the cover forward may cause it to break.

  2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. A0041JA

      Disconnect the camshaft timing oil control valve assembly connector.

    2. Remove the bolt and remove the camshaft timing oil control valve assembly.

    3. A0041WI

      Remove the O-ring from the camshaft timing oil control valve assembly.