NAVIGATION ECU INSTALLATION


  1. INSTALL EXTENSION MODULE


    1. Connect the connector to install the extension module.

    2. Connect each connector to install the navigation wire and radio cable.

  2. INSTALL NO. 2 RADIO BRACKET


    1. w/o Navigation System:


      1. Install the No. 2 radio bracket with the 3 bolts.

    2. w/ Navigation System:


      1. Install the No. 2 radio bracket with the 5 bolts.

  3. INSTALL NO. 1 RADIO BRACKET


    1. w/o Navigation System:


      1. Install the No. 1 radio bracket with the 3 bolts.

    2. w/ Navigation System:


      1. Install the No. 1 radio bracket with the 5 bolts.

  4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET


    1. Connect each connector.

    2. Engage the 4 claws.

    3. Install the radio and display receiver assembly with bracket with the 4 bolts.

  5. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. A0040N0

      Connect the connector.

    2. Engage the 3 claws to install the upper instrument panel finish panel sub-assembly.

  6. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH


    1. Connect the connector.

    2. Engage the 14 claws to install the instrument cluster finish panel garnish.

  7. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A0040B6

      Engage the 7 claws and 2 clips to install the lower center instrument cluster finish panel sub-assembly.

  8. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A004159

      Connect each connector.

    2. Engage the 6 claws to install the integration control and panel assembly.

  9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  10. INSTALL REAR NO. 3 FLOOR BOARD UPPER PLATE


    1. Engage the 2 claws to install the rear No. 3 floor board upper plate.

  11. INSTALL DECK FLOOR BOX RH


    1. Install the deck floor box RH Click here.

    2. Install the rear No. 2 floor board.

  12. INSTALL REAR NO. 3 FLOOR BOARD


    1. Install the rear No. 3 floor board.