REAR DOOR SPEAKER INSTALLATION


  1. INSTALL REAR SPEAKER ASSEMBLY


    1. Using an air riveter or a hand riveter, install the rear speaker assembly with 3 new rivets.

      A004291E01
      Text in Illustration
      *1 Riveter *2 Mandrel
      *a INCORRECT *b CORRECT

      Note


      • Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

      • Confirm that the rivet is seated properly against the moulding. Do not tilt the riveter when installing the rivet to the moulding. Do not leave any clearance between the rivet head and moulding.

      • Do not leave any clearance between the moulding and door frame. Firmly hold the 2 items together while installing the rivet.

      Tech Tips

      If the rivet cannot be cut, pull it once and cut it.

    2. Connect the connector.

  2. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 8 Speakers)


    1. Install the rear No. 2 speaker assembly with the 2 screws.

  3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY


    1. for 8 Speakers:


      1. Connect the connector.

    2. A0043VB

      Engage the 8 clips and install the rear door trim board sub-assembly.

    3. Install the 2 screws.

    4. Remove the protective tape.

  4. INSTALL REAR DOOR ARMREST COVER


    1. A0041EU

      Install the rear door armrest cover.

  5. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    1. Connect the connector.

    2. A0041MN

      Engage the 7 claws and 2 guides, and install the rear power window regulator switch assembly with rear door armrest base panel.

  6. INSTALL DOOR ASSIST GRIP COVER


    1. A0040E5

      Engage the 6 claws, 2 clips and 3 guides, and install the door assist grip cover.

  7. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG


    1. A0041DE

      Engage the 3 claws and install the rear door inside handle bezel plug.