STEERING COLUMN ASSEMBLY INSPECTION

Note

When using a vise, do not overtighten it.


  1. INSPECT PRELOAD


    1. A00403PE01

      Secure the steering column assembly in a vise.

    2. Using SST, turn the main shaft and measure the preload.

      SST
      09616-00011
      Torque:
      Preload
      0.9 to 1.5 N*m  { 10 to 15 kgf*cm, 8 to 12 in.*lbf }

      If the preload is not as specified, replace the steering column assembly with a new one.

  2. INSPECT STEERING COLUMN ASSEMBLY


    1. Inspect the bushings.


      1. A0040U3E01
        Text in Illustration
        *1 Bushing

        Check that the 2 bushings are securely installed to the steering column assembly.

        If the 2 bushings are installed improperly, replace the steering column assembly with a new one.

      2. Check the 2 bushings for deformation and damage.

        If the bushings are deformed or damaged, replace the steering column assembly with a new one.

    2. Inspect the capsules.


      1. A0042P7E01
        Text in Illustration
        *1 Capsule

        Check that the 2 capsules are securely installed to the steering column assembly as shown in the illustration.

        Standard Dimension
        A B
        2 mm (0.0787 in.) 17 mm (0.669 in.)

        If the capsules are not positioned as specified, replace the steering column assembly with a new one.

      2. Check the 2 capsules for deformation and damage.

        If either of the capsules is deformed, loose, missing or damaged, replace the steering column assembly with a new one.