PARKING BRAKE CABLE REMOVAL


  1. REMOVE REAR WHEEL

  2. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY (for LHD)

    Click here

  3. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY (for RHD)

    Click here

  4. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)


    1. A0040ZH

      Remove the adjusting nut.

    2. A0041EZ

      Pull up the parking brake pedal claw.

    3. A0043N6

      Remove the clip from the No. 1 parking brake cable assembly.

    4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

  5. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)


    1. A004449

      Remove the adjusting nut.

    2. A004107

      Pull up the parking brake pedal claw.

    3. A00449H

      Remove the clip from the No. 1 parking brake cable assembly.

    4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

  6. REMOVE NO. 1 PARKING BRAKE PULL ROD SUB-ASSEMBLY


    1. A0041ZK

      Separate the No. 3 parking brake cable assembly from the No. 1 parking brake pull rod sub-assembly as shown in the illustration.

    2. Separate the No. 2 parking brake cable assembly to remove the No. 1 parking brake pull rod sub-assembly.

      Tech Tips

      Perform the same procedure as for the No. 3 parking brake cable assembly.

  7. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  8. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR


    1. A0040HZ

      Remove the 3 nuts and front No. 2 floor heat insulator.

  9. REMOVE REAR FLOOR SIDE MEMBER COVER LH


    1. A00434K

      Remove the nut, 2 bolts and rear floor side member cover LH.

  10. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A003ZXE

      Disengage the clamp to separate the No. 2 parking brake cable clamp.

    2. A0041YXE01

      Separate the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.

    3. A0042KXE04
      Text in Illustration
      *1 No. 3 Parking Brake Cable Assembly
      *2 Clip
      *3 Offset Wrench (14 mm)

      Disconnect the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.

      Tech Tips

      Insert an offset wrench (14 mm) at the base of the No. 3 parking brake cable assembly as shown in the illustration to disengage the clip. Pull out the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly.

    4. Remove the 5 bolts and No. 3 parking brake cable assembly.

      A0041SY

  11. REMOVE NO. 2 PARKING BRAKE CABLE CLAMP


    1. for Separate type No. 2 parking brake cable clamp:


      1. A0041OO

        Disengage the 2 claws to remove the No. 2 parking brake cable clamp from the No. 3 parking brake cable assembly.

    2. for One-piece type No. 2 parking brake cable clamp:


      1. Using pliers or equivalent, disconnect the No. 2 parking brake cable clamp and remove it from the No. 3 parking brake cable assembly.

        Tech Tips

        No. 2 parking brake cable clamp cannot be reused once removed. Make sure to remove it from the No. 3 parking brake cable clamp.