TIRE PRESSURE WARNING RECEIVER INSTALLATION


  1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER


    1. Connect the connector to the tire pressure warning ECU and receiver.

    2. A0043RS

      Engage the 2 hooks to temporarily install the tire pressure warning ECU and receiver.

    3. Install the bolt.

      Torque:
      8.3 N*m  { 85 kgf*cm, 73 in.*lbf }

  2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH

    Click here

  3. REGISTER TRANSMITTER ID

    Click here

  4. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here

  5. PERFORM INITIALIZATION

    Click here