If a trouble code is displayed during the DTC check, check the circuit listed for that code in the table below and proceed to the appropriate page.
Tech Tips
It may not be possible to clear the following DTCs using the GTS: DTC C2300 (Actuator System Malfunction), C2301 (Shift Changing Time Malfunction), C2303 (Short in Power Source Relay Circuit), C2304 (Open or Short Circuit in U Phase), C2305 (Open or Short Circuit in V Phase), C2306 (Open or Short Circuit in W Phase), C2307 (Power Supply) and C2309 (Open in B+ Circuit). In such cases, disconnect the P CON MAIN fuse and wait for at least 60 seconds to clear the DTCs after the repair.
When a DTC is detected, the master warning light comes on and an error message is indicated on the multi-information display.
| DTC Code | Detection Item | Master Warning Light | Multi-display Error Message | Memory | See page |
|---|---|---|---|---|---|
| C2300 | Actuator System Malfunction | Comes on | Comes on | DTC stored | |
| C2301 | Shift Changing Time Malfunction | Comes on | Comes on | DTC stored | |
| C2303 | Short in Power Source Relay Circuit | Comes on | Comes on | DTC stored | |
| C2304 | Open or Short Circuit in U Phase | Comes on | Comes on | DTC stored | |
| C2305 | Open or Short Circuit in V Phase | Comes on | Comes on | DTC stored | |
| C2306 | Open or Short Circuit in W Phase | Comes on | Comes on | DTC stored | |
| C2307 | Power Supply | Comes on | Comes on | DTC stored | |
| C2308 | EEPROM Malfunction | - | - | DTC stored | |
| C2309 | Open in B+ Circuit | Comes on | Comes on | DTC stored | |
| C2310 | Open or Short Circuit in Battery Circuit | Comes on | Comes on | DTC stored | |
| C2311 | Communication Error from HV ECU | Comes on | Comes on | DTC stored | |
| C2315 | HV System | Comes on | Comes on | DTC stored | |
| U0146 | Lost Communication with Body ECU | - | - | DTC stored |