ELECTRONIC SHIFT LEVER SYSTEM FAIL-SAFE CHART

If the transmission control ECU assembly detects a malfunction, the fail-safe functions shown in the table below are activated.

DTC No. Fail-safe Function Problem Symptoms

C2300

C2301

 Only park (P) release operation is possible and the shift control actuator assembly is activated.

Either of the following may occur:


  • The shift state (P, R, N, D or B) is not indicated correctly on the meter.

  • Although the shift state is indicated on the combination meter, the vehicle cannot be driven.
C2303 - The auxiliary battery is discharged.

C2304

C2305

C2306

 The P-CON MTR relay (transaxle parking lock control relay) is turned off. The parking lock mechanism cannot be switched.
C2307 The P-CON MTR relay (transaxle parking lock control relay) is turned off.

Either of the following may occur:


  • The shift state (P, R, N, D or B) is not indicated correctly on the meter.

  • Although the shift state is indicated on the combination meter, the vehicle cannot be driven.
C2308 -

Either of the following may occur:


  • The parking lock mechanism cannot be switched.

  • The key reminder buzzer sounds constantly.
C2309 The P-CON MTR relay (transaxle parking lock control relay) is turned off. The parking lock mechanism cannot be switched.
C2311 - The parking lock mechanism cannot be switched.