FUEL LID LOCK CONTROL INSTALLATION


  1. INSTALL FUEL FILLER OPENING LID LOCK RETAINER

    A01J48Z

    1. Install the fuel filler opening lid lock retainer and turn it counterclockwise as shown in the illustration.

  2. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

    A01J5L2

    1. Install the fuel lid lock control cable and turn the fuel filler opening lid lock retainer clockwise as shown in the illustration.

    2. Attach the cable to each of the clamps shown in the illustration and install new tape.

    3. Install the fuel lid lock open lever.

      A01J303E01
      Text in Illustration
      *1 Fuel Lid Lock Open Lever *2 Tape
  3. INSTALL FRONT FLOOR CARPET ASSEMBLY


    1. Install the front floor carpet.

  4. INSTALL QUARTER INSIDE TRIM BOARD LH


    1. Connect the power point socket connector.

    2. Attach the 7 claws and 10 clips to install the quarter inside trim board.

    3. Install the clip.

    4. Install the rear door opening trim weatherstrip.

    5. Connect the rear No. 2 seat outer belt floor anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    6. Connect the rear No. 1 seat outer belt floor anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    7. Attach the 2 claws to install the outer lap belt anchor cover.

      Tech Tips

      Use the same procedure for both outer lap belt anchor covers.

  5. INSTALL QUARTER TRIM HOOK

    Tech Tips

    Use the same procedure for both quarter trim hooks.


    1. Install the quarter trim hook with the screw.

  6. INSTALL BACK DOOR SCUFF PLATE


    1. Attach the 4 claws, 2 guides and 6 clips to install the back door scuff plate.

  7. INSTALL LOWER CENTER PILLAR GARNISH LH


    1. Attach the 2 claws, 2 guides and 2 clips to install the lower center pillar garnish.

    2. Install the front door opening trim and rear door opening trim weatherstrip.

    3. Connect the front seat outer belt floor anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    4. Attach the 2 claws to install the outer lap belt anchor cover.

  8. INSTALL REAR DOOR SCUFF PLATE LH


    1. Attach the 2 clips and 7 claws to install the rear door scuff plate.

  9. INSTALL COWL SIDE TRIM BOARD LH


    1. Attach the 2 clips to install the cowl side trim board.

    2. Install the clip.

    3. Install the front door opening trim.

  10. INSTALL FRONT DOOR SCUFF PLATE LH


    1. Attach the 2 clips and 7 claws to install the rear door scuff plate.

  11. INSTALL CONSOLE BOX ASSEMBLY

    Click here

  12. INSTALL REAR NO. 2 SEAT ASSEMBLY LH

    Click here

  13. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

    Click here

  14. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

    Click here

  15. INSTALL FRONT SEAT ASSEMBLY LH


    1. for Manual Seat:

      Click here

    2. for Power Seat:

      Click here

  16. INSTALL FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.