SIDE STEP REASSEMBLY

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL NO. 1 SIDE STEP STAY SUB-ASSEMBLY LH


    1. Install a nose piece to an air riveter or hand riveter.

    2. Insert the mandrel part of a new rivet into the nose piece.

    3. A01J3W8

      Using the riveter, install the No. 1 side step stay with the 2 rivets as shown in the illustration.

      Tech Tips

      If the rivet cannot be cut, pull it once and cut it.

      Note


      • A01J68OE15

        Do not pry the rivet with the riveter as this will cause damage to the riveter and mandrel.

        Text in Illustration
        *1 Riveter
        *2 Mandrel
        *a INCORRECT
        *b CORRECT
      • A01J3QWE14

        Confirm that the rivets are seated properly against the No. 1 side step stay.

      • Do not tilt the riveter when installing the rivet to the No. 1 side step stay.

      • Do not leave any space between the rivet head and No. 1 side step stay.

        Text in Illustration
        *1 Riveter
        *a INCORRECT
        *b CORRECT
      • A01J6COE13

        Do not leave any space between the No. 1 side step stay and step plate. Firmly hold together the 2 items while installing the rivet.

        Text in Illustration
        *1 Riveter
        *a INCORRECT
        *b CORRECT

  2. INSTALL NO. 2 SIDE STEP BRACKET LH


    1. Install a nose piece to an air riveter or hand riveter.

    2. Insert the mandrel part of a new rivet into the nose piece.

    3. A01J338

      Using the riveter, install the No. 2 side step bracket with the 2 rivets as shown in the illustration.

      Tech Tips

      If the rivet cannot be cut, pull it once and cut it.

      Note


      • A01J68OE15

        Do not pry the rivet with the riveter as this will cause damage to the riveter and mandrel.

        Text in Illustration
        *1 Riveter
        *2 Mandrel
        *a INCORRECT
        *b CORRECT
      • A01J3QWE14

        Confirm that the rivets are seated properly against the No. 2 side step bracket.

      • Do not tilt the riveter when installing the rivet to the No. 2 side step bracket.

      • Do not leave any space between the rivet head and No. 2 side step bracket.

        Text in Illustration
        *1 Riveter
        *a INCORRECT
        *b CORRECT
      • A01J6COE13

        Do not leave any space between the No. 2 side step bracket and step plate. Firmly hold together the 2 items while installing the rivet.

        Text in Illustration
        *1 Riveter
        *a INCORRECT
        *b CORRECT

  3. INSTALL NO. 3 SIDE STEP BRACKET LH


    1. Install a nose piece to an air riveter or hand riveter.

    2. Insert the mandrel part of a new rivet into the nose piece.

    3. A01J5P2

      Using the riveter, install the No. 3 side step bracket with the 2 rivets as shown in the illustration.

      Tech Tips

      If the rivet cannot be cut, pull it once and cut it.

      Note


      • A01J68OE15

        Do not pry the rivet with the riveter as this will cause damage to the riveter and mandrel.

        Text in Illustration
        *1 Riveter
        *2 Mandrel
        *a INCORRECT
        *b CORRECT
      • A01J3QWE14

        Confirm that the rivets are seated properly against the No. 3 side step bracket.

      • Do not tilt the riveter when installing the rivet to the No. 3 side step bracket.

      • Do not leave any space between the rivet head and No. 3 side step bracket.

        Text in Illustration
        *1 Riveter
        *a INCORRECT
        *b CORRECT
      • A01J6COE13

        Do not leave any space between the No. 3 side step bracket and step plate. Firmly hold together the 2 items while installing the rivet.

        Text in Illustration
        *1 Riveter
        *a INCORRECT
        *b CORRECT

  4. INSTALL STEP PLATE COVER LH


    1. Attach the 17 claws to install the step plate cover.