REAR DOOR GLASS WEATHERSTRIP INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL REAR DOOR OUTER GLASS WEATHERSTRIP LH


    1. Attach the 4 claws to install the rear door outer glass weatherstrip.

  2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. Attach the 10 clips to install the rear door trim board.

    2. Install the screw.

  3. INSTALL DOOR PULL HANDLE


    1. Install the door pull handle with the screw.

  4. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    1. Connect the connector.

    2. Attach the 2 claws and 2 clips to install the rear power window regulator switch assembly with rear door armrest base panel.