REAR DOOR GLASS WEATHERSTRIP REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    1. A01J4YE

      Using a moulding remover, detach the 2 clips and 2 claws.

    2. Disconnect the connector and remove the rear power window regulator switch assembly with rear door armrest base panel.

  2. REMOVE DOOR PULL HANDLE


    1. A01J5TY

      Remove the screw and door pull handle.

  3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. A01J5U4

      Remove the screw.

    2. Detach the 10 clips and remove the rear door trim board.

  4. REMOVE REAR DOOR OUTER GLASS WEATHERSTRIP LH


    1. A01J4CWE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear door outer glass weatherstrip.

    2. Detach the 4 claws and remove the rear door outer glass weatherstrip.