REAR SPOILER REASSEMBLY


  1. INSTALL REAR NO. 4 SPOILER PROTECTOR

    Tech Tips


    • Use the same procedure for both rear No. 4 spoiler protectors.

    • When installing a rear No. 4 spoiler protector, heat the rear spoiler surface using a heat light.

    Standard
    Item Temperature
    Rear Spoiler 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear spoiler excessively.


    1. Clean the rear spoiler surface.


      1. Using a heat light, heat the rear spoiler surface.

      2. Remove the double-sided tape from the rear spoiler surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A01J4V1

      Install a new rear No. 4 spoiler protector in the position shown in the illustration.

  2. INSTALL REAR NO. 2 SPOILER PROTECTOR

    Tech Tips


    • Use the same procedure for both rear No. 2 spoiler protectors.

    • When installing a rear No. 2 spoiler protector, heat the rear spoiler surface using a heat light.

    Standard
    Item Temperature
    Rear Spoiler 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear spoiler excessively.


    1. Clean the rear spoiler surface.


      1. Using a heat light, heat the rear spoiler surface.

      2. Remove the double-sided tape from the rear spoiler surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A01J6CU

      Install a new rear No. 2 spoiler protector in the position shown in the illustration.

  3. INSTALL REAR NO. 1 SPOILER PROTECTOR

    Tech Tips

    When installing a rear No. 1 spoiler protector, heat the rear spoiler surface using a heat light.

    Standard
    Item Temperature
    Rear Spoiler 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear spoiler excessively.


    1. Clean the rear spoiler surface.


      1. Using a heat light, heat the rear spoiler surface.

      2. Remove the double-sided tape from the rear spoiler surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A01J711

      Install a new rear No. 1 spoiler protector in the position shown in the illustration.

  4. INSTALL CENTER STOP LIGHT ASSEMBLY


    1. Install the center stop light assembly with the 2 screws.