BACK DOOR SUPPORT INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL BACK DOOR STAY ASSEMBLY LH


    1. When using a new bolt:


      1. Clean the threaded portion on the vehicle body with a non-residue solvent.

    2. When reusing a bolt:


      1. Clean the threaded portion on the vehicle body and bolt with a non-residue solvent.

      2. Apply adhesive to the threads of the bolt.

        Adhesive
        Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

    3. Install the back door stay with the 4 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      CAUTION:

      Install the back door stay while holding the back door.