BACK DOOR DISASSEMBLY


  1. REMOVE DOOR PULL HANDLE


    1. A01J3SE

      Detach the 4 claws and remove the door pull handle.

  2. REMOVE BACK DOOR TRIM BOARD ASSEMBLY


    1. A01J30U

      Detach the 16 clips and remove the back door trim board.

  3. REMOVE BACK DOOR LOCK ASSEMBLY


    1. Disconnect the connector and detach the clamp.

    2. Disconnect the back door lock cable.

      A01J6H5E01
      Text in Illustration
      *1 Back Door Lock Cable Assembly - -
    3. A01J59N

      Remove the 3 bolts and back door lock.

  4. REMOVE BACK DOOR OUTSIDE HANDLE


    1. A01J752

      Remove the 2 nuts and back door outside handle.

  5. REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)


    1. A01J6FE

      Disconnect the connector.

    2. Remove the 2 nuts and rear television camera assembly.

  6. REMOVE BACK DOOR OUTSIDE GARNISH


    1. A01J3B8

      w/ Rear View Monitor System:

      Remove the nut.

    2. A01J367

      w/o Rear View Monitor System:

      Remove the 3 nuts.

    3. A01J4LEE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the back door outside garnish.

    4. Detach the 2 clips and remove the back door outside garnish.

  7. REMOVE REAR LIGHT ASSEMBLY LH


    1. A01J6GF

      Disconnect the connector.

    2. Remove the 2 nuts.

    3. A01J5G0E01
      Text in Illustration
      *1 Protective tape

      Put protective tape around the rear light assembly LH.

    4. Detach the clip and pin as shown in the illustration.

    5. Remove the rear light assembly LH.

  8. REMOVE REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

    A01J5SZ

    1. Detach the 2 claws and remove the cap.

    2. A01J3RR

      Remove the nut and arm and blade.

  10. REMOVE REAR WIPER MOTOR ASSEMBLY

    A01J4A7

    1. Disconnect the connector.

    2. Remove the 3 bolts and wiper motor.

  11. REMOVE REAR WIPER MOTOR GROMMET


    1. A01J50X

      Remove the rear wiper motor grommet.

  12. REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER


    1. A01J3VE

      Detach the 4 claws.

    2. A01J35A

      Disconnect the connector.

    3. Detach the clamp and remove the No. 2 back door service hole cover.

  13. REMOVE REAR SPOILER


    1. A01J7M9

      Remove the 2 grommets.

    2. A01J6OK

      Remove the 3 nuts.

    3. A01J39VE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear spoiler.

    4. Detach the 4 clips and remove the rear spoiler.

  14. REMOVE REAR WASHER NOZZLE SUB-ASSEMBLY


    1. A01J3UH

      Disconnect the washer hose.

    2. Detach the 2 claws and remove the rear washer nozzle.

  15. REMOVE BACK DOOR GLASS CHANNEL LH


    1. A01J6IME01

      Using a clip remover, remove the 2 clips.

    2. Using a screwdriver, detach the tape and remove the channel.

      Tech Tips

      Tape the screwdriver tip before use.

  16. REMOVE BACK DOOR GLASS CHANNEL RH

    Tech Tips

    Use the same procedure described for the LH side.

  17. REMOVE BACK DOOR PANEL CUSHION

    Tech Tips

    Use the same procedure for both back door panel cushions.


    1. A01J3FTE01
      Text in Illustration
      *1 for Upper Side
      *2 for Lower Side

      Remove the 2 back door panel cushions.

  18. REMOVE BACK DOOR LOWER STOPPER

    Tech Tips

    Use the same procedure for both back door lower stoppers.


    1. A01J6VT

      Remove the bolt and back door lower stopper.

  19. REMOVE BACK DOOR STAY ASSEMBLY LH


    1. A01J4RI

      Remove the 4 bolts and back door stay.

      CAUTION:

      Remove the back door stay while holding the back door.

  20. REMOVE BACK DOOR STAY ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.