HOOD LOCK CONTROL CABLE ASSEMBLY INSTALLATION


  1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY


    1. A01J3FOE01
      Text in Illustration
      *1 String

      Tie the string that was passed through the engine compartment to the end of the hood lock control cable as shown in the illustration.

      Tech Tips

      Use a length of string long enough to pass through the engine compartment.

    2. Pass the hood lock control cable through the vehicle body, and then attach the grommet and each clamp.

    3. Untie the string from the hood lock control cable.

      A01J39KE01
      Text in Illustration
      *1 Hood Lock Control Cable *2 Grommet

  2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. Connect the hood lock control cable to the hood lock control lever.

    2. Attach the 3 claws to install the hood lock control lever.

  3. INSTALL HOOD LOCK ASSEMBLY


    1. A01J45L

      Apply MP grease to the sliding areas of the lock.

    2. Connect the hood lock control cable.

    3. Install the hood lock with the 3 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 78 in.*lbf }

  4. INSTALL RADIATOR GRILLE


    1. Attach the 6 claws to install the radiator grille.

    2. Install the 2 screws and 2 clips.