HOOD ADJUSTMENT

Tech Tips


  • A01J5JXE01

    Centering bolts are used to mount the hood hinge to the vehicle body and hood. The hood cannot be adjusted with the centering bolts on. Substitute the centering bolts for standard bolts (with washers) when making adjustments.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

Text in Illustration
*1 Centering Bolt
*2 Standard Bolt

  1. ADJUST HOOD SUB-ASSEMBLY


    1. A01J45I

      Adjust the hood position.


      1. Loosen the 4 hinge bolts on the hood and adjust the hood position.

      2. Move the hood and adjust the clearance between the hood and front fender.

      3. Tighten the 4 hinge bolts on the hood after the adjustment.

        Torque:
        13 N*m  { 133 kgf*cm, 10 ft.*lbf }
    2. A01J4HN

      Adjust the cushion rubbers so that the hood and fender are aligned.

      Tech Tips

      Raise or lower the front end of the hood by turning the cushion rubber.

    3. A01J66C

      Adjust the hood lock.


      1. Loosen the 3 bolts.

      2. Adjust the hood lock position so that the striker can enter it smoothly.

      3. Tighten the 3 bolts after the adjustment.

        Torque:
        8.0 N*m  { 82 kgf*cm, 71 in.*lbf }