FRONT POWER SEAT MOTOR ASSEMBLY (for Slide) REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY


    1. Remove the front seat assembly Click here.

  2. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A01J5JH

      Apply protective tape around the cushion shield.

    2. Using a screwdriver, detach the 2 claws and remove the knob.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE SLIDE & VERTICAL POWER SEAT SWITCH KNOB


    1. A01J6QI

      Using a screwdriver, detach the 4 claws and remove the knob.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT SEAT CUSHION SHIELD LH WITH FRONT INNER NO. 1 SEAT CUSHION SHIELD


    1. A01J4HV

      Remove the 2 screws.

    2. A01J3WV

      Remove the 3 screws.

    3. Detach the claw and guide.

    4. Remove the cushion shield.

  5. REMOVE FRONT POWER SEAT SWITCH


    1. A01J4HT

      Remove the 3 screws.

    2. Disconnect the connector and remove the switch.

  6. REMOVE FRONT SEAT CUSHION INNER SHIELD LH


    1. A01J4ZY

      Remove the screw.

    2. Pull the cushion inner shield to detach the claw and guide.

    3. A01J5VZ

      Pull the cushion inner shield to detach the claw and remove the cushion inner shield.

  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH


    1. A01J3L8

      Detach the clamp.

    2. A01J5AO

      Detach the wire harness from the clamp.

    3. Roll up over the front seat cushion cover LH.

    4. Remove the nut and front seat inner belt assembly LH.

  8. REMOVE SEAT CUSHION COVER WITH PAD


    1. A01J3RW

      Remove the hog rings.

    2. Detach the hooks and remove the seat cushion cover with pad.

      A01J4QC

  9. REMOVE FRONT POWER SEAT MOTOR ASSEMBLY (for Slide)


    1. A01J363

      Detach the 2 wire harness clamps.

    2. Detach the 4 clamps indicated by the arrows in the illustration and remove the seat cushion spring.

    3. A01J5O9

      Remove the 4 bolts and seat cushion frame.

    4. A01J4CD

      Put matchmarks on the seat track rail and sliding unit of the seat frame.

    5. Disconnect the connector.

    6. A01J32K

      Connect the positive (+) battery terminal to terminal 1 of the power seat motor and the negative (-) battery terminal to terminal 2 and slide the seat to the foremost position.

    7. A01J7L8

      Detach the claw and disconnect the connector from the seat frame.

    8. Loosen the 2 nuts.

    9. A01J32K

      Connect the positive (+) battery terminal to terminal 2 of the power seat motor and the negative (-) battery terminal to terminal 1 and slide the seat to the rearmost position.

    10. A01J74U

      Using a 5 mm socket hexagon wrench, remove the 2 bolts.

    11. Using a 4 mm socket hexagon wrench, remove the 4 bolts.

    12. Remove the 2 nuts and front power seat motor assembly with slide cable.

      Note

      Do not apply excessive force to the slide cable (do not bend the slide cable 60° or more).

    13. A01J4Z9

      Remove the slide cable.