FRONT POWER SEAT MOTOR ASSEMBLY (for Reclining) REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY


    1. Remove the front seat assembly Click here.

  2. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A01J5JH

      Apply protective tape around the cushion shield.

    2. Using a screwdriver, detach the 2 claws and remove the knob.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE SLIDE & VERTICAL POWER SEAT SWITCH KNOB


    1. A01J6QI

      Using a screwdriver, detach the 4 claws and remove the knob.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT SEAT CUSHION SHIELD LH WITH FRONT INNER NO. 1 SEAT CUSHION SHIELD


    1. A01J4HV

      Remove the 2 screws.

    2. A01J3WV

      Remove the 3 screws.

    3. Detach the claw and guide.

    4. Remove the cushion shield.

  5. REMOVE FRONT SEAT CUSHION INNER SHIELD LH


    1. A01J4ZY

      Remove the screw.

    2. Pull the cushion inner shield to detach the claw and guide.

    3. A01J5VZ

      Pull the cushion inner shield to detach the claw and remove the cushion inner shield.

  6. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01J5JL

      Remove the hog rings from the wires of the seatback cover. Then roll up the seatback cover.

    2. A01J5SO

      Remove the hog rings and roll up the seatback cloth.

    3. A01J312

      Remove the hog rings and detach the strap of the seatback cover. Then roll up the seatback cover.

    4. A01J4F2

      Remove the hog rings from the center of the seatback pad and roll up the seatback cover.

    5. A01J4LV

      Remove the hog rings from the upper part of the seatback pad. Then roll up the seatback cover.

    6. A01J717

      Detach the 4 claws and remove the 2 headrest supports.

    7. A01J3CP

      Remove the hog rings and seatback cover.

  7. REMOVE SEPARATE TYPE FRONT SEATBACK PAD


    1. A01J6W4

      Remove the seatback pad.

  8. REMOVE NO. 1 SEATBACK CLOTH


    1. A01J5S5

      Remove the seatback cloth.

  9. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER LH


    1. A01J3K4

      Remove the screw.

    2. Detach the claw and remove the cover.

  10. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER LH


    1. A01J3QFE02

      Remove the screw.

    2. Detach the guide and remove the cover.

  11. REMOVE FRONT POWER SEAT MOTOR ASSEMBLY (for Reclining)


    1. A01J5R6

      Detach the 8 hooks and remove the seatback spring.

    2. Disconnect the connector.

    3. A01J76X

      Detach the 6 claws and remove the push nut from the reclining rod.

    4. A01J4EY

      Remove the reclining rod.

    5. A01J5QM

      Using a 4 mm socket hexagon wrench, remove the 3 bolts and motor.