POWER SEAT SWITCH INSPECTION


  1. INSPECT FRONT POWER SEAT SWITCH


    1. A01J5CIE01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Reclining Switch
      Tester Connection Switch Condition Specified Condition
      1 (B) - 3 (RCLF) Front Below 1 Ω
      2 (RCLR) - 4 (E)
      3 (RCLF) - 4 (E) Off
      2 (RCLR) - 4 (E)
      1 (B) - 2 (RCLR) Rear
      3 (RCLF) - 4 (E)
      Slide Switch
      Tester Connection Switch Condition Specified Condition
      1 (B) - 9 (SLDF) Front Below 1 Ω
      6 (SLDR) - 4 (E)
      9 (SLDF) - 4 (E) Off
      6 (SLDR) - 4 (E)
      1 (B) - 6 (SLDR) Rear
      9 (SLDF) - 4 (E)
      Rear Lifter Switch
      Tester Connection Switch Condition Specified Condition
      1 (B) - 7 (LUP) Up Below 1 Ω
      8 (LDWN) - 4 (E)
      7 (LUP) - 4 (E) Off
      8(LDWN) - 4 (E)
      1 (B) - 8(LDWN) Down
      7(LUP) - 4 (E)

      If the result is not as specified, replace the front power seat switch.