REAR NO. 1 SEAT ASSEMBLY (for LH Side) REMOVAL


  1. REMOVE REAR SEAT CUSHION HINGE COVER LH


    1. A01J3SJE01

      Using a clip remover, remove the clip.

    2. Using a screwdriver, detach the 2 claws and remove the hinge cover.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE REAR SEAT CUSHION HINGE COVER RH

    Tech Tips

    Use the same procedures described for the LH side.

  3. REMOVE REAR NO. 1 SEAT ASSEMBLY

    A01J7N5E01

    1. Fully tilt the seatback forward.

    2. Remove the 2 bolts.

    3. Unlock the seat locks by pulling the reclining remote control lever knob in the direction of the arrow in the illustration. Then fold the seat as shown in the illustration.

    4. A01J6J0E01

      Remove the 2 nuts and seat.

      Note

      Be careful not to damage the vehicle body.