FRONT SEAT ASSEMBLY (for Power Seat) INSTALLATION


  1. INSTALL FRONT SEAT ASSEMBLY


    1. Place the front seat assembly in the cabin.

      Note

      Be careful not to damage the vehicle body.

    2. Connect the seat wire connector under the seat.

    3. Connect the cable to the negative (-) battery terminal.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

    4. Temporarily install the front seat assembly with the 4 bolts.

    5. Operate the power seat switch (slide switch) to move the seat to the rearmost position.

    6. A01J6GQE01

      Tighten the bolts in the order shown in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    7. Operate the power seat switch (slide switch) to move the seat to the foremost position.

    8. A01J4EOE01

      Tighten the bolts in the order shown in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  2. INSTALL OUTER SEAT TRACK BRACKET COVER


    1. A01J63WE01

      Attach the 2 claws in the order shown in the illustration to install the cover.

      Note

      Be careful not to damage 2 claws.

  3. INSTALL INNER SEAT TRACK BRACKET COVER


    1. A01J6GYE01

      Attach the 2 claws in the order shown in the illustration to install the cover.

      Note

      Be careful not to damage 2 claws.

  4. INSTALL FRONT SEAT HEADREST ASSEMBLY

  5. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.

  6. INSPECT FRONT SEAT ASSEMBLY


    1. Check the power seat operation Click here.