FRONT SEAT ASSEMBLY (for Power Seat) REMOVAL


  1. REMOVE FRONT SEAT HEADREST ASSEMBLY

  2. REMOVE INNER SEAT TRACK BRACKET COVER


    1. A01J3W3

      Operate the power seat switch (slide switch) to move the seat to the foremost position.

    2. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE OUTER SEAT TRACK BRACKET COVER


    1. A01J724

      Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT SEAT ASSEMBLY


    1. A01J4EO

      Remove the 2 bolts.

    2. Operate the power seat switch (slide switch) to move the seat to the rearmost position.

    3. A01J6GQ

      Remove the 2 bolts.

    4. Operate the power seat switch (slide switch) and move the seat to the center position, operate the power seat switch (reclining switch) and move the seatback to the upright position, and operate the power seat switch (lifter switch) and move the seat to the uppermost position.

    5. Disconnect the cable from the negative (-) battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

      Note

      When disconnecting the cable, systems need to be initialized after the cable is reconnected Click here.

    6. Disconnect the connector under the seat.

    7. Remove the seat from the vehicle.

      Note

      Be careful not to damage the vehicle body.