REAR NO. 2 SEAT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the RH side.


  1. INSTALL REAR SEAT LOCK STRIKER


    1. Install the 2 lock strikers with the 4 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    2. Install the floor carpet.

  2. INSTALL REAR NO. 2 SEAT ASSEMBLY


    1. Fully tilt the seatback forward.

    2. A01J6NKE01

      Place the seat onto the lock striker.

      Note

      Be careful not to damage the vehicle body.

    3. Tighten the bolt on the rear side of the seat.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    4. Tighten the bolt on the front side of the seat.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    5. Fully lock the seat to the lock striker.

      Tech Tips

      Confirm that the seat is firmly locked to the lock striker.

  3. INSTALL REAR SEAT FRONT BRACKET COVER RH

    A01J3H1E01

    1. Attach the hook to install the bracket cover.

    2. Install the screw.

  4. INSTALL REAR SEAT REAR BRACKET COVER RH


    1. Attach the hook to install the bracket cover.

    2. Install the screw.

    3. Return the seatback to the upright position.